Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
72
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
72
Hitron CGN3 User’s Guide
5.2.2 5G Settings
Use this screen to configure the CGN3’s 5GHz wireless network.
Click Wireless > Basic Settings, then click the 5G tab. The following screen
displays.
Network Name (SSID) Enter the name that you want to use for this SSID. This
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
Enable Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
Broadcast SSID Use this field to make this SSID visible or invisible to
other wireless devices.
Select ON if you want your network name (SSID) to
be public. Anyone with a wireless device in the
coverage area can discover the SSID, and attempt
to connect to the network.
Select OFF if you do not want the CGN3 to
broadcast the network name (SSID) to all wireless
devices in the coverage area. Anyone who wants
to connect to the network must know the SSID.
WMM (QoS) Use this field to apply Wifi MultiMedia (WMM) Quality of
Service (QoS) settings to this SSID.
Select ON to enable WMM QoS on this SSID.
Select OFF to disable WMM QoS on this SSID.
Save Changes Click this to save your changes to the fields in this
screen.
Cancel Click this to return the fields in this screen to their last-
saved values without saving your changes.
Help Click this to see information about the fields in this
screen.
Table 24: The Wireless: Basic Settings Screen (2.4G) (continued)
To Next Page
Loading...
Need help?
General
