Version 1.1, 08/2013. Copyright 2012 Hitron Technologies
55
Version 1.1, 08/2013. Copyright 2013 Hitron Technologies
55
Hitron CGN3 User’s Guide
Figure 19: The Basic: Port Forwarding Screen
The following table describes the labels in this screen.
Table 17: The Basic: Port Forwarding Screen
All Port Forwarding Rules Use this field to turn port forwarding on or off.
Select Enabled to turn port forwarding on.
Select Disabled to turn port forwarding off.
Port Forwarding Rules
Select Select a port forwarding rule’s radio button before
clicking Edit or Delete.
# This displays the arbitrary identification number
assigned to the port forwarding rule.
Application Name This displays the name you assigned to the rule when
you created it.
Public This field displays the incoming port range. These are
the ports on which the CGN3 received traffic from the
originating host on the WAN.
Private This field displays the port range to which the CGN3
forwards traffic to the device on the LAN.
Protocol This field displays the protocol or protocols to which this
rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
Local IP Address This displays the IP address of the computer on the LAN
to which traffic conforming to the rule’s conditions is
forwarded.
To Next Page
Loading...
Need help?
General
