Honda BF40D Owner's Manual

22
CONTROLS AND FEATURES (H type)
Emergency Stop Switch
Press the emergency stop switch to
stop the engine.
The emergency stop switch lanyard is
provided to stop the engine
immediately when the operator falls
overboard or away from the outboard
motor.
The engine stops when the clip at the
end of the emergency stop switch
lanyard is pulled out of the
emergency stop switch.
When operating the outboard motor,
be sure to attach one end of the
emergency stop switch lanyard
securely to the operator.
If the emergency stop switch
lanyard is not set, the boat
might run out of control when
the operator, for example, falls
overboard and is not able to
operate the outboard motor.
For the sake of the operator’s and the
passengers’ safety, be sure to set the
emergency stop switch clip located at
one end of the emergency stop
switch lanyard with the emergency
stop switch. Attach the other end of
the emergency stop switch lanyard
securely to the operator.
STOP
EMERGENCY STOP SWITCH
Emergency
S
top
S
w
i
tch Lanyard
/
Clip
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
STOP
EMERGENCY STOP
SWITCH CLIP
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY STOP SWITCH
<<DQQMࡍ࡯ࠫ㧞㧜㧝㧟ᐕ㧝㧜᦬㧝ᣣޓἫᦐᣣޓඦᓟ㧞ᤨ㧟㧡ಽ

Honda BF40D Specifications

General

Displacement	808 cc
Full Throttle RPM Range	5, 000-6, 000 RPM
Horsepower	40 HP
Cooling System	Water Cooled
Starting System	Electric
Lubrication	Wet Sump
Trim Range	-4° to +16°
Tilt Range	72°
Steering	Remote
Gear Shift	F-N-R
Gear Ratio	2.08:1
Fuel Tank Capacity	External
Fuel Delivery	Programmed Fuel Injection
Exhaust	Through Propeller
Weight	205 lbs
Shaft Length	L type: 20 in, X type: 25 in
Alternator Output	12V
Engine Type	4-Stroke, SOHC, 3 Cylinder
Cylinder Configuration	Inline 3