[2]
[3]
TOOL:
FLYWHEEL PULLER SET [3] 07935-805004
FLYWHEEL SPECIAL NUT (16 mm)
COOLING FAN
STARTER PULLEY
SPECIAL WOODRUFF KEY
(25 x 18 mm)
REMOVAL:
Hold the flywheel [1] with a commercially available strap wrench
[2] and use the special tool to remove the flywheel.
Do not hit the flywheel with a hammer.
REMOVAL:
Hold the flywheel [1] with a commercially available
strap wrench [2] and remove the special nut (16
mm) [3].
Take care not to damage the cooling fan.
[1]
STARTER PULLEY
(With starter)
FLYWHEEL
(Without starter)
FLYWHEEL
(With screen)
(Without screen)
[2]
[3]
[1]
To Next Page
Loading...
Need help?
General
