Galaxy Flex Installer Manual Additional services
31
If no schedule is allocated to a particular group (default) in the list then users will have full
access through any doors leading to that group. When a schedule is allocated, access will be
granted during the OFF periods of the schedule and denied during the ON periods.
Additional services
Connection to a local computer via USB
Follow this procedure if you wish to programme the system via a PC and a USB cable
1. Ensure the PC is installed with Remote Servicing Suite Software.
2. Ensure the USB Comm port is set up according to the software instructions.
3. Create a new site in the RSS software database.
4. In the site setup, select Direct Connection and then select the USB comm. port.
5. Select Dial and the software connects to the control panel.
No settings need to be altered on the control panel.
Connection to a remote service computer
Follow this procedure if you need to connect to a remote service centre:
1
. Select Remote Access (47 ent).
2. Select Call back (1 ent 0 ent 1 ent).
3. Select the module type
4. Select a pre-programmed call back number or enter the phone number of the remote
service centre.
5. Press ent.
The panel dials the remote service centre.
To Next Page
Loading...
Need help?
General
