Parameters [51] Galaxy Flex Installer Manual
84
Parameter list
Parameter Groups
Parameter Groups
01 = Bell Time
50 = Trigger Mod not available
02 = Bell Delay
54 = Keypad Access not available
03 = Abort Time
55 = Confirm not available
04 = Exit Time
56 = Force Restore not available
05 = Entry Time
58 = Power Alarm not available
06 = System Reset
59 = Part Tone not available
07 = Tamper Reset
60 = RF Parameters not available
08 = No. Re-arms
61 = Activity Mon not available
09 = Omit All
62 = Lockout not available
10 = Key '0' not available
63 = Banner alerts not available
11 = Local Part
64 = Set Override not available
12 = Banner not available
65 = Reset Levels not available
13 = PA Delay
66 = Min Pin Size not available
14 = KEY/SW Level not available
68 = Line Fail not available
15 = System Text not available
69 = Alert Inds not available
16 = Soak Time not available
70 = SWDC Set Dly not available
17 = Restart not available
71 = MF BL Enable not available
18 = Stop Set not available
72 = Max Alm Cause not available
19 = Part Alarm
73 = Guard Unset not available
20 = Power Delay
76 = MAX LEDs Off not available
21 = Reset Mgr. not available
77 = Duress User not available
22 = PA reset
78 = Entry Time 2
24 = Exit Alarm
79 = Camera PIR not available
27 = cct Debounce not available
80 = Simple Set not available
28 = Online print not available
81 = Output Option not available
29 = Online level not available
82 = OP 3(99) not available
30 = Video
83 = Common Siren not available
32 = Show Alarms not available
84 = User Test not available
33 = Secure Code not available
85 = HU Monitor not available
35 = Fail To Set
86 = Auto Reset not available
41 = Weekend Work not available
87 = Omit Signal not available
43 = Timer Access not available
88 = Silent Eng. not available
46 = Res. Select not available
89 = Patrol Code not available
47 = Set Confirm not available
90 = Hide Com Flts not available
48 = Alarm Limits not available
91 = Log IP Check not available
49 = Confirm Time not available