Honeywell Xenon XP 1952g User Manual

118 Xenon XP User Guide
Silent Mode with Long LED
Scan the following barcode to completely silence the scanner and base. The
scanner beep, base beep, base and scanner power up beep, and scanner linking
sounds are all silenced. When a barcode is scanned, the LED and aimer remain
solidly lit for 1 second. Green indicates a good scan, red indicates a bad scan.
Very Low Beeper (Nighttime Mode)
The following barcode silences the base, and sets the scanner for a very low beep
when reading barcodes. After scanning this code, the base beep, base and scanner
power up beep, and scanner linking sounds are all silenced. When a barcode is
scanned, the scanner emits a very soft beep.
Silent Mode with Long LED -
Cordless Scanner and Base
Silent Mode with Long LED -
Corded Scanner
Nighttime Mode -
Cordless Scanner and Base
Nighttime Mode -
Corded Scanner

Honeywell Xenon XP 1952g Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, U.P.C.
Optical sensor resolution (W x H)	1240 x 800 pixels
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417, QR Code
Battery life	14 h
Charging time	4.5 h
Battery capacity	2400 mAh
Power source type	Battery
Number of reads per charge	50000
Wireless range	10 m
Bluetooth version	4.2
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Product color	Black
LED indicators	Yes
Built-in display	No
Protection features	Bump resistant
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	99 mm
Width	64 mm
Height	165 mm
Weight	220 g