Honeywell Xenon XP 1952g User Manual

120 Xenon XP User Guide
Number of LED Flashes
If you have silenced the scanner’s beeper, you may set the number of times the
LED flashes when reading barcodes. Default = 1 LED Flash.
Note: If you have set LED Solid (No Flash) (page 121), to anything but Off, that setting will
override the LED Flash settings. In that case, scan the LED Solid Off barcode to turn
off this feature, then scan the LED Flash code you wish to use.
LED Flash Rate
If you have silenced the scanner’s beeper, you may set the how quickly the LED
flashes when reading barcodes. Default = Fast Flash.
* 1 LED Flash
5 LED Flashes
10 LED Flashes
25 LED Flashes
* Fast Flash
Medium Flash
Slow Flash

Honeywell Xenon XP 1952g Specifications

General

Type	Handheld bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-45 - 45 °
Light levels (direct sunlight)	0 - 100000 lx
Linear (1D) barcodes supported	Code 128, Code 39, U.P.C.
Optical sensor resolution (W x H)	1240 x 800 pixels
2D (matrix & stacked) barcodes supported	Data Matrix, PDF417, QR Code
Battery life	14 h
Charging time	4.5 h
Battery capacity	2400 mAh
Power source type	Battery
Number of reads per charge	50000
Wireless range	10 m
Bluetooth version	4.2
Operating frequency	2400 MHz
Standard interfaces	Bluetooth, USB
Connectivity technology	Wired & Wireless
Product color	Black
LED indicators	Yes
Built-in display	No
Protection features	Bump resistant
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	99 mm
Width	64 mm
Height	165 mm
Weight	220 g