To Next Page

To Previous Page

160

Figure 66 Add a port group

# Select User Access Manager > Service Parameters > Validate System Configuration from the

navigation tree to validate the configurations.

2. Configure the switch

• Configure a RADIUS scheme

# Create a RADIUS scheme named rs1 and enter its view.

<Switch> system-view

[Switch] radius scheme rs1

# Set the server type for the RADIUS scheme. When using the iMC server, set the server type to extended.

[Switch-radius-rs1] server-type extended

# Specify the primary authentication server and primary accounting server, and configure the keys for

communication with the servers.

[Switch-radius-rs1] primary authentication 192.168.0.112

[Switch-radius-rs1] primary accounting 192.168.0.112

[Switch-radius-rs1] key authentication radius

[Switch-radius-rs1] key accounting radius

# Specify that the ISP domain name should not be included in the username sent to the RADIUS server.

[Switch-radius-rs1] user-name-format without-domain

[Switch-radius-rs1] quit

• Configure an authentication domain

# Create an ISP domain named dm1 and enter its view.

[Switch] domain dm1

# Configure AAA methods for the ISP domain.

[Switch-isp-dm1] authentication portal radius-scheme rs1

[Switch-isp-dm1] authorization portal radius-scheme rs1

[Switch-isp-dm1] accounting portal radius-scheme rs1

[Switch-isp-dm1] quit

HP 3600 v2 Series Security Configuration Guide

Other manuals for HP 3600 v2 Series