HP 3600 v2 Series Security Configuration Guide

282
To do... Use the command… Remarks
Establish a
connection
between the
SSH client and
the server, and
specify the
public key
algorithm,
preferred
encryption
algorithm,
preferred
HMAC
algorithm and
preferred key
exchange
algorithm
For an IPv4 server
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] [ identity-key { dsa |
rsa } | prefer-ctos-cipher { 3des | aes128
| des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
Required
Use either command in
user view.
For an IPv6 server
ssh2 ipv6 server [ port-number ]
[ identity-key { dsa | rsa } |
prefer-ctos-cipher { 3des | aes128 |
des } | prefer-ctos-hmac { md5 | md5-96
| sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange | dh-group1 |
dh-group14 } | prefer-stoc-cipher { 3des
| aes128 | des } | prefer-stoc-hmac
{ md5 | md5-96 | sha1 | sha1-96 } ] *
Displaying and maintaining SSH
To do… Use the command… Remarks
Display the source IP address or
interface set for the SFTP client
display sftp client source [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display the source IP address or
interface information on an SSH
client
display ssh client source [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display SSH server status
information or session information
on an SSH server
display ssh server { status |
session } [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the mappings between
SSH servers and their host public
keys on an SSH client
display ssh server-info [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display information about SSH
users on an SSH server
display ssh user-information
[ username ] [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the public keys of the local
key pairs
display public-key local { dsa |
rsa } public [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display the public keys of the SSH
peers
display public-key peer [ brief |
name publickey-name ] [ | { begin
| exclude | include }
regular-expression ]
Available in any view
NOTE:
For more information about the display public-key local and display public-key peer commands, see
Security Command Reference .

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English