HP 3600 v2 Series Security Configuration Guide

290
Figure 110 SSH client configuration interface 2)
Click Open to connect to the server. If the connection is normal, you will be prompted to enter the
username. After entering the username (client002), you can enter the configuration interface of the
server.
SSH client configuration examples
When switch acts as client for password authentication
Network requirements
As shown in Figure 111, Switch A (the SSH client) must pass password authentication to log in to Switch
B (the SSH server) through the SSH protocol. Configure the username client001 and the password aabbcc
for the SSH client on Switch B.
Figure 111 Network diagram
Configuration procedure
1. Configure the SSH server.
# Generate the RSA key pairs.
<SwitchB> system-view

HP 3600 v2 Series Specifications

General

Brand	HP
Model	3600 v2 Series
Category	Switch
Language	English