Technical Reference Guide 2–5
System Configuration
Configuration Menu
The following commands are available in the configuration menu.
----------------------------------------------------------------------------------
Main Menu: Enter command or menu > co
--- Configuration Menu ------------------------------------------------------
Command Description
------- -----------
AUto [BOot|SEArch|STart] [ON|OFF] Display or set specified flag
BootID [<proc> [<bootid>]] Display or set Boot Identifier
BootINfo Display boot-related information
BootTimer [0 - 200] Seconds allowed for boot attempt
CPUconfig [<proc> [ON|OFF]] Config/Deconfig processor
DEfault Set the system to predefined values
FastBoot [ON|OFF] Display or set boot tests execution
LanConfig [<config type>] Display or set LAN configuration
MOnitor [LIST|<type>] Display or set the current monitor type
PAth [PRI|ALT|CON|KEY [<path>]] Display or change a path
PoWerRestore [ON|OFF|LAST] Display or set the Power Restore Policy
ResTart [ON|OFF] Display or set the System Restart Policy
SEArch [DIsplay|[[IPL] [<path>]]] Search for boot devices
SECure [ON|OFF] Set/show security mode
TIme [c:y:m:d:h:m[:s]] Read or set the real time clock in GMT
BOot [PRI|ALT|<path>] Boot from specified path
DIsplay Redisplay the current menu
HElp [<command>] Display help for specified command
RESET Restart the system
----------------------------------------------------------------------------------
The configuration default command sets the following values:
Primary boot path: scsiA.0 (core SCSI)0
Alternate boot path: lan.0.0.0.0 (core LAN)
Console path: graph3 (AGP Graphics Slot 3)
Keyboard path: usb0 (core USB)
Autoboot: ON
Autosearch: ON
Autostart: OFF
BootTimer 0
To Next Page
Loading...
Need help?
General
