Appendix E Server Management Using HP Support Anywhere
116
To finish configuration, at the main program window:
1. Click "Be A Host PC."
2. Select the Modem connection item (see illustration below).
Figure E-13. pcANYWHERE32 Modem Connection Items
3. Right-click the Modem connection item to display the drop-down menu.
4. Choose "Properties…" from the drop-down menu in the "Connection Info"
section.
After verifying that the COM port and modem type are set correctly, click
OK to return to pcANYWHERE32's main program window.
5. Run the Modem connection item by double-clicking it. This initializes the
modem and establishes the Modem connection item you just set up as the
default.
NOTE The settings you have just selected become
pcANYWHERE32's defaults for the server-side installation. In
order for pcANYWHERE32 to communicate with a remote
console, the installation at the remote console must use these
same settings.
A pcANYWHERE32 icon appears to indicate the configuration process is
complete. Your server is now ready to support a remote connection. To customize
your host configuration for more options and greater security (for example,
To Next Page
Loading...
Need help?
General