Installing the HP Intelligent Power Distribution Unit 28
The ground bonding cable is not included in this kit.
Connecting the iPDU to the power source
WARNING: To prevent injury from electric shock or damage to the equipment:
• Plug the input line cord into a grounded (earthed) electrical outlet that is installed near the
equipment and is easily accessible.
• Do not disable the grounding plug on the input line cord. The grounding plug is an
important safety feature.
• Do not use extension cords.
Connect the iPDU to a grounded utility power outlet.
The AC branch circuit overcurrent protection should be sized according to the standard of the plug
configuration on each model. The maximum overcurrent rating for each model is listed in "Connecting
devices (on page 29)."
To Next Page
Loading...
Need help?
General
