HP Intelligent PDU web interface 52
d.
Enter the number of hours that should pass between each date and time update.
7. If you disabled NTP in step 5:
a. Enter the date.
b. Enter the time.
c. Select the date format from the dropdown box.
8. To adjust for daylight saving time, select the Enable radio button, and then do the following:
a. Enter the month, day, week, and time that daylight saving time starts.
b. Enter the month, day, week, and time that daylight saving time ends.
c. Select the amount of time the clock changes for daylight saving time in your region. Available
options are 30 minutes and 1 hour.
9. Do one of the following:
o Click Save Settings to save the information.
o Click Undo Changes to undo the changes.
o Click Help to view online help.
Network Management menu
Click Network Management in the left navigation frame to access the Network Management screen. This
screen contains controls that enable administrators to configure network management settings for the
iPDU.
The Network Management screen contains the following:
• System Management tab (on page 53)
• Trap Receivers tab (on page 54)
• SNMP Managers tab (on page 55)
• Email Setup tab (on page 56)
• Event Notifications tab (on page 57)
• Remote Access tab (on page 58)
To Next Page
Loading...
Need help?
General
