HP Smart Array errors 106
1 - Amber 2 - Green 3 - Green Interpretation
Off
On Off The current backup is complete with no errors.
Flashing once
per second
Flashing once
per second
Off The current backup failed, and data has been lost.
Flashing once
per second
Flashing once
per second
On A power error occurred during the previous or current
boot. Data may be corrupt.
Flashing once
per second
On Off An overtemperature condition exists.
Flashing twice
per second
Flashing twice
per second
Off The battery is not connected to the system board.
Flashing twice
per second
Flashing twice
per second
On The battery has been charging for 10 minutes, but has
not reached sufficient charge to perform a full backup.
On
On Off The current backup is complete, but power fluctuations
occurred during the backup.
On
On On The cache module microcontroller has failed.
Smart Array Windows Event Log messages
Message identifiers 24578-24599
Message Id: 24578
Severity: Informational
Log message: The HP Smart Array SAS/SATA event notification service version %1.
Message Id: 24579
Severity: Informational
Log message: An event queue overflow has occurred for the array controller
<controller name / slot information>. At least one event has been lost. This
controller will only queue up to 100 events.
Message Id: 24580
Severity: Error
Log Message: The HP Smart Array SAS/SATA Event Notification Service needs to be
upgraded and cannot process events at this time. The service is being stopped
and processing of HP Smart Array controller events to the Windows system event
log, ProLiant Integrated Management Log (IML) and Integrity System Event Log (SEL)
will not occur until the software is updated.
To upgrade your software, please visit
http://welcome.hp.com/country/us/en/support.html?pageDisplay=drivers
Message Id: 24581
Severity: Informational
Log message: The HP Smart Array SAS/SATA event notification service <status
message>.
<status message> values:
To Next Page
Loading...
Need help?
General
