Microsoft Windows Event ID and SNMP traps 389
Log Severity: Warning (2)
Log Message: The Rack And Enclosure MIB Agent received an unknown action code from the service. The
data contains the action code.
Event identifier: cpqsvmsg.dll - 5645 (Hex)0x8435160d (Service Event)
Log Severity: Warning (2)
Log Message: The Rack And Enclosure MIB Agent could not get the system type. The data contains the error
code.
Event identifier: cpqsvmsg.dll - 5682 (Hex)0x84351632 (Service Event)
Log Severity: Warning (2)
Log Message: The Rack And Enclosure MIB Agent could not set the variable because it is unsupported. The
data contains the error code.
Event identifier: cpqsvmsg.dll - 5683 (Hex)0x84351633 (Service Event)
Log Severity: Warning (2)
Log Message: The Rack And Enclosure MIB Agent could not set the variable because the value is invalid or
out of range. The data contains the error code.
Event identifier: cpqsvmsg.dll - 5684 (Hex)0x84351634 (Service Event)
Log Severity: Warning (2)
Log Message: The Rack And Enclosure MIB Agent is not loaded. Sets are not available. The data contains the
error code.
NIC agents
Event Identifiers 256-299
Event identifier: cpqnimsg.dll - 256 (Hex)0x84350100 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent detected an error. The insertion string is: %1. The data contain
the error code.
Event identifier: cpqnimsg.dll - 257 (Hex)0x84350101 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to allocate memory. This indicates a low memory condition. Rebooting the system will
correct this error.
Event identifier: cpqnimsg.dll - 258 (Hex)0x84350102 (Service Event)
Log Severity: Warning (2)
Log Message: The NIC Management Agent could not register with the Service Control Manager. The data
contain the error code.
Event identifier: cpqnimsg.dll - 259 (Hex)0x84350103 (Service Event)
Log Severity: Warning (2)
To Next Page
Loading...
Need help?
General
