HP Virtual Connect errors 216
Profile reason code Description
vcProfileOk
The profile is normal.
The server the profile is assigned to is abnormal.
vcProfileAllConnectionsFailed
All connections in the profile have failed.
vcProfileSomeConnectionsUnmapped
One or more connections in the profile are not mapped to a
physical port.
vcProfileAllConnectionsAbnormal
All connections in profile are abnormal.
vcProfileSomeConnectionsAbnormal
Some connections in the profile are abnormal.
VC domain checkpoint traps
The domain checkpoint trap indicates configuration changes have been saved in non-volatile memory and
copied (check-pointed) to the horizontally adjacent module.
vcCheckpointTimeout
The checkpoint valid status remained false for more than five minutes.
vcCheckpointCompleted
A checkpoint operation has completed following a checkpoint timeout trap. The checkpoint valid status is true
again. This trap is not sent on every checkpoint completion, but only on a checkpoint completion after a
vcCheckpointTimeout trap has been sent.
vcDomainStackingLinkRedundancyStatusChange
The stacking link connection redundancy status has changed. The vcDomainStackingLinkRedundant OID
contained within this trap indicates whether all VC-Enet modules will remain connected to each other with the
loss of a link.
vcTestTrap
The VC domain test trap is received when the administrator sends a test trap via the VC GUI or CLI. The test
trap is sent to all configured trap destinations.
Virtual Connect Manager SysLog events
The events generated in the Syslog cover the following areas that are managed by the Virtual Connect
Manager:
• Domain (1000–1999)
• Enclosure (2000–2999)
• Ethernet Interconnect modules (3000–3999)
• FC Interconnect modules (4000–4999)
• Servers (5000–5999)
• Profiles (6000-6999)
• Ethernet Network (7000–7999)
• FC Fabric (8000–8999)
To Next Page
Loading...
Need help?
General
