HP ProLiant ML30 Gen10 Plus User Manual

Energy pack optionsEnergy pack options
Hewlett Packard Enterprise offers two centralized backup power source options to back up write cache content on the controllers in
case of an unplanned server power outage.
HPE Smart Storage Battery
HPE Smart Storage Hybrid Capacitor
IMPORTANT:IMPORTANT:
The HPE Smart Storage Hybrid Capacitor is only supported on Gen10 and later servers.
One energy pack option can support multiple devices. An energy pack option is optional. However, to enable flash backed write cache
(FBWC) or SmartCache (SR) on the storage controller, the energy pack option is required. Once installed, the status of the energy pack
displays in HPE iLO. For more information, see the HPE iLO user guide on the Hewlett Packard Enterprise websiteHewlett Packard Enterprise website .
Energy pack options 124

HP ProLiant ML30 Gen10 Plus Specifications

General

Processor Sockets	1
Memory	Up to 128 GB DDR4 ECC UDIMM
Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E-2300 series
Storage	Up to 4 LFF or 8 SFF drives
RAID Support	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Network	1 x 1GbE
Power Supply	350W
Chipset	Intel C252
Storage Controller	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Maximum Internal Storage	Up to 64 TB
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Weight	Approx. 10.5 kg