EasyManuals Logo

HP ProLiant ML30 Gen10 Plus User Manual

HP ProLiant ML30 Gen10 Plus
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #219 background imageLoading...
Page #219 background image
Environmental specificationsEnvironmental specifications
SpecificationsSpecifications ValueValue
Temperature range*Temperature range*
Operating 10°C to 35 °C (50°F to 95°F)
Nonoperating -30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing)Relative humidity (noncondensing)
Operating 8% to 90%
28°C (82.4°F) maximum wet bulb temperature, noncondensing
Nonoperating 5% to 95%
38.7°C (101.7°F) maximum wet bulb temperature, noncondensing
AltitudeAltitude
Operating 3050 m (10,000 ft)
This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1,500 ft/min).
Nonoperating 9144 m (30,000 ft)
Maximum allowable altitude change rate is 457 m/min (1,500 ft/min).
Standard operating supportStandard operating support
10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1,000 ft) above sea level to a
maximum of 3,050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 20°C/hr (36°F/hr). The upper limit and rate of
change may be limited by the type and number of options installed.
System performance during standard operating support might be reduced if operating above 30°C (86°F).
Extended ambient operating supportExtended ambient operating support
For approved hardware configurations, the supported system inlet range is extended to be: 5° to 10°C (41° to 50°F) and 35° to 40°C
(95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2,953 ft) to a
maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the Hewlett Packard EnterpriseHewlett Packard Enterprise
websitewebsite.
40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m
(2953 ft) to a maximum of 3,050 m (10,000 ft). The approved hardware configurations for this system are listed on the HewlettHewlett
Packard EnterprisePackard Enterprise website website .
Environmental specifications 219

Table of Contents

Other manuals for HP ProLiant ML30 Gen10 Plus

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProLiant ML30 Gen10 Plus and is the answer not in the manual?

HP ProLiant ML30 Gen10 Plus Specifications

General IconGeneral
Processor Sockets1
MemoryUp to 128 GB DDR4 ECC UDIMM
Memory Slots4
Form FactorTower
ProcessorIntel Xeon E-2300 series
StorageUp to 4 LFF or 8 SFF drives
RAID SupportHPE Smart Array S100i, S100i SR Gen10 SW RAID
Network1 x 1GbE
Power Supply350W
ChipsetIntel C252
Storage ControllerHPE Smart Array S100i, S100i SR Gen10 SW RAID
Maximum Internal StorageUp to 64 TB
Operating System SupportWindows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
WeightApprox. 10.5 kg

Related product manuals