HP ProLiant ML30 Gen10 Plus User Manual

HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency)
SpecificationSpecification ValueValue
Input requirementsInput requirements —
Rated input voltage 100 VAC to 240 VAC
Rated input frequency 47 Hz to 63 Hz
Rated input current 6 A
Rated input power 400 W at 115 VAC
400 W at 230 VAC
Efficiency At 115 VAC:
No less than 87% at 100% load
No less than 90% at 50% load
No less than 87% at 20% load
At 230 VAC:
No less than 88% at 100% load
No less than 92% at 50% load
No less than 88% at 20% load
Power supply outputPower supply output —
Rated steady-state power 350 W at 115 VAC
350 W at 230 VAC
Maximum peak power 385 W at 115 VAC
385 W at 230 VAC
Rated output power 350 W
HPE 350 W Gold Non-hot-plug Power Supply (92% efficiency) 222

HP ProLiant ML30 Gen10 Plus Specifications

General

Processor Sockets	1
Memory	Up to 128 GB DDR4 ECC UDIMM
Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E-2300 series
Storage	Up to 4 LFF or 8 SFF drives
RAID Support	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Network	1 x 1GbE
Power Supply	350W
Chipset	Intel C252
Storage Controller	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Maximum Internal Storage	Up to 64 TB
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Weight	Approx. 10.5 kg