HP ProLiant ML30 Gen10 Plus User Manual

HPEHPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency) 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency)
SpecificationSpecification ValueValue
Input requirementsInput requirements —
Rated input voltage 100 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current 5.8 A at 100 VAC
2.8 A at 200 VAC
2.4 A at 240 VDC for China only
Maximum rated input power 580 W at 100 VAC
560 W at 200 VAC
558 W at 240 VDC for China only
BTUs per hour 1999 at 100 VAC
1912 at 200 VAC
1904 at 240 VDC for China only
Power supply outputPower supply output —
Rated steady-state power 500 W at 100 VAC to 127 VAC input
500 W at 100 VAC to 240 VAC input
500 W at 240 VDC input for China only
Maximum peak power 500 W at 100 VAC to 127 VAC input
500 W at 100 VAC to 240 VAC input
500 W at 240 VDC input for China only
HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency) 223

HP ProLiant ML30 Gen10 Plus Specifications

General

Processor Sockets	1
Memory	Up to 128 GB DDR4 ECC UDIMM
Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E-2300 series
Storage	Up to 4 LFF or 8 SFF drives
RAID Support	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Network	1 x 1GbE
Power Supply	350W
Chipset	Intel C252
Storage Controller	HPE Smart Array S100i, S100i SR Gen10 SW RAID
Maximum Internal Storage	Up to 64 TB
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
Weight	Approx. 10.5 kg