Figure 34 Specifying the Conversion Mode in the Edit Option File
.
For each line in the Edit Option file, the part of the line after the necessary item (1 parameter), as
well as any data following “#”, are treated as comments. Blank lines are also treated as comments.
Figure 35 Including Comments in the Edit Option File
.
Conversion Mode Format Details
• The Edit Option file includes conversion mode information such as that for alphanumeric character
conversions and double-byte code conversions. Information appears in no particular order for
every conversion mode (OPnn) used in the Field Definition file.
• Information for each conversion mode starts with a definition label header specified in the format
“[CHAR:OPnn]”, “[KANJI:OPnn]”, or “[NUM:OPnn]”, and continues until the next definition label
header “[xxxx:OPnn]” appears. The end of information is indicated with the end indicator (two
characters “[]”).
• Conversion mode parameters are specified one parameter per line, for the prescribed number of
parameters as shown in Table 7 through Table 10. Parameters are specified in the order of the
line number shown in these tables. Note these line numbers only count lines with effective inform-
ation, and do not include lines that only contain comments.
P9000 Data Exchange Code Converter User Guide 49
To Next Page
Loading...
Need help?
General