Step Description
Upgrade the system. Upgrade software or firmware, and install or update drivers to
the latest versions.
Documents
l Configure the iBMC. The configuration method varies depending on the iBMC version.
For details, see FusionServer Pro Rack Server iBMC User Guide.
l Configure RAID settings. For details, see Huawei V5 Server RAID Controller Card
User Guide.
l Configure BIOS settings. For details, see Huawei Server Purley Platform BIOS
Parameter Reference.
l Install the operating system. For details, see Huawei Server OS Installation Guide.
l Handle alarms. For details, see FusionServer Pro Rack Server iBMC Alarm
Handling.
l Rectify faults. For details, see Huawei Servers Troubleshooting.
7.4.3 Changing Initial Passwords
7.4.3.1 Changing the Initial Password of the Default iBMC User
Scenarios
This section describes how to change the initial password of the default iBMC user on the
iBMC WebUI.
You can change the initial password of the default iBMC user on:
l iBMC WebUI
For details, see FusionServer Pro Rack Server iBMC User Guide.
l iBMC CLI
For details, see FusionServer Pro Rack Server iBMC User Guide.
l The default user name of the iBMC is Administrator, and the default password is Admin@9000.
l For security purposes, change the initial password upon the first login and change the password
periodically.
l You are advised to use a password that meets complexity requirements or to enable the password
complexity check function.
l The password complexity check function is enabled by default.
Procedure
Step 1 Log in to the iBMC WebUI.
For details, see 9.2 Logging In to the iBMC WebUI.
FusionServer Pro 2288H V5 Server
User Guide
7 Installation and Configuration
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 103
To Next Page
Loading...
Need help?
General
