The server automatically restarts for the settings to take effect.
----End
9.6 Accessing the BIOS
9.6.1 Entering the BIOS (Skylake)
Procedure
Step 1 Log in to the desktop of the server.
For details, see 9.3 Logging In to the Desktop of a Server.
Step 2 On the Remote Virtual Console, click
on the menu bar.
Step 3 Select Reset or Forced System Reset.
"Are you sure to perform this operation?" is displayed.
Step 4 Click Yes.
The server is restarted.
Step 5 During the restart, press Delete or F4 when the information shown in Figure 9-16 is
displayed.
Figure 9-16 BIOS startup screen
FusionServer Pro 2288H V5 Server
User Guide
9 Common Operations
Issue 08 (2019-10-30) Copyright © Huawei Technologies Co., Ltd. 136
To Next Page
Loading...
Need help?
General