Hunter Douglas PowerView Pebble User Manual

– 8 –
JOINING A SHADE TO A GROUP
Shades must be joined to a Group to operate. A
single shade can be joined to multiple Groups,
if desired.
q
PRESS and HOLD  (Stop) until
indicator lights blink on the PowerView™
Pebble
®
Remote.
w
RELEASE  (Stop).
e
PRESS and RELEASE the desired Group
number (1-6) on the remote.
The selected group number will blink.
NOTE: Steps 4-6 must be completed within
5 seconds.
r
PRESS and HOLD the manual control
button on the headrail.
t
Then PRESS and RELEASE
5
(Open) on
the remote.
The shade will jog to indicate it’s been
joined to the selected Group.
y
RELEASE the manual control button.
NOTE: To join additional shades to the
same Group, repeat steps 4-6 for each
shade.
u
PRESS and HOLD  (Stop) on the remote
until the indicator lights stop blinking.
4
VIDEO INSTRUCTION
q
e
w
r
yt

Hunter Douglas PowerView Pebble Specifications

General

Brand	Hunter Douglas
Model	PowerView Pebble
Category	Remote Control
Language	English