English - 29
2. SPECIAL MENU FUNCTIONS
2.7 The Tools menu, functions
Via the Tools menu you can access data about the
mower’s function, test functions and special settings.
As in other menus the selections you make are
shown as a numerical series in the bottom right
corner of the display. Select:
• Operating history (5-1),
to show key data, this give an overview of a
mower’s age and function.
• Test (5-2),
to actively test the mower’s different components
and functions.
• Live data (5-3),
to study an Automower in operation, i.e. when it
is not in test mode, but is checked by its own
mower program.
• Demo mode (5-4), (only 220 AC)
to be able to demonstrate the Automower
without mowing.
• Loop detection (5-5),
to turn off the mower’s loop detection and in doing
so be able to run the Automower without installing
the boundary wire.
• Special settings (5-6),
to adjust the square mode cutting function, return
the mower back to the start-up sequence,
calibrate the tilt sensor and override STOP button.
Commands
Timer
Garden
Settings
Tools
Operating history
Test
Live data
Demo mode
Loop detection
Special settings
5-
To Next Page
Loading...
Need help?
General
