English - 33
2. SPECIAL MENU FUNCTIONS
• Docking attempts =
the accumulated number of times that the
Automower has reached the N-field.
• Coll while docking =
the accumulated number of occasions that the
Automower has reached the N-field, but collided
before docking.
• Timer mode (h) =
the accumulated number of hours that the timer
function on the Automower has been activated.
Search times
Information about how long a search for the charging
station has taken. The list shown contains the times
of the last 18 search events.
Trip Operation counters (5-1-2)
Trip Op. counters contains the same information as
Operating data above. The difference is that in Trip
Op. counters it is possible to reset all values, just as a
trip meter in a car.
To reset:
• Place the cursor on Reset trip and press YES.
Now press YES to the question Reset trip
operation counters?.
All values are reset and the date of the reset is
shown in the right-hand column of the display.
NOTE! When Trip Op. counters is reset, the value for
Chargings OK, is also reset, i.e. the battery's age,
both in the main counter and in the trip counter. If the
value for Chargings OK, see page 32, is to remain an
indicator of the battery's total age, Trip Op. counters
should only be reset when replacing the battery.
Key data
Mowing
Charging
Search times
Key data
Mowing
Charging
Reset trip
Operating data
Trip Op. counters
Fault messages
Software
Battery history
5-1-2
To Next Page
Loading...
Need help?
General
