Hypertherm Powermax 125 Service Manual

Powermax125 Service Manual 808070 295
11 – Parts
Exterior, rear
Part Number Description
1 228914 Kit: Powermax105 power cord strain relief 400 V CE/380 V CCC;
Powermax125 power cord strain relief 480 V and 600 V CSA/380 V CCC
1 228913 Kit: Powermax105 power cord strain relief 230 – 400 V CE;
Powermax125 power cord strain relief 400 V CE
2 428121 Kit: Powermax125 power cord with strain relief 480 V and 600 V CSA
2 228886 Kit: Powermax105 power cord with strain relief 230 – 400 V CE;
Powermax125 power cord with strain relief 400 V CE
3 228539 Kit: Serial interface port, internal cables, and RS-485 board
223236 RS-485 cable, unterminated, 7.6 m (25 feet)
223237 RS-485 cable, unterminated, 15 m (50 feet)
223239 RS-485 cable, 9-pin D-sub connector for Hypertherm controls, 7.6 m (25 feet)
223240 RS-485 cable, 9-pin D-sub connector for Hypertherm controls, 15 m (50 feet)
4 228884 Kit: Powermax105/125 machine interface cable, internal cable with voltage divider
board (CPC port)
127204 Cover for Powermax45/65/85/105/125 machine interface (CPC) receptacle
023206 External machine interface cable (start, stop, arc transfer signals), 7.6 m (25 feet),
spade connectors
1
2
3
4
5
6

Hypertherm Powermax 125 Specifications

General

Brand	Hypertherm
Model	Powermax 125
Category	Welding System
Language	English