Powermax125 Service Manual 808070 313
11 – Parts
Recommended spare parts
Hypertherm recommends that service centers keep the following spare parts on hand for repairs because these parts are
critical or are usually exposed to heavy and repeated wear. You may find that you need to revise or expand this list for your
customers, based on the conditions and work environments in your region.
Part Number Description
428143 Kit: Adjustment knob
428142 Kit: Operating mode knob
223292 Kit: 125 A work lead with hand clamp, 7.6 m (25 feet)
228866 Kit: Powermax105/125 front panel
228657 Kit: Powermax65/105/125 control board (141100)
428123 Kit: Powermax125 power board 480 V CSA (141204)
428124 Kit: Powermax125 power board 600 V CSA (141290)
428122 Kit: Powermax125 power board 400 V CE/380 V CCC (141207)
228880 Kit: Powermax105/125 power switch 400 V CE/380 V CCC/480 V, 600 V CSA
428130 Kit: Powermax125 transformer 600 V CSA
428128 Kit: Powermax125 transformer 400 V CE/380 V CCC
428136 Kit: Powermax125 bulk capacitor 480 V CSA
428135 Kit: Powermax125 bulk capacitor 400 V CE/380 V CCC
428127 Kit: Powermax125 PFC inductor 480 V/600 V CSA
428126 Kit: Powermax125 PFC inductor 400 V CE/380 V CCC
428125 Kit: Powermax125 output inductor
228688 Kit: Powermax65/85/105/125 pressure switch
228882 Kit: Powermax105/125 regulator/solenoid valve
228881 Kit: Powermax105/125 fan assembly
228685 Kit: Powermax65/85/105/125 gas filter assembly
228695 Kit: Powermax65/85/105/125 gas filter element
428253 Kit: Duramax Hyamp O-ring replacement (5)
428155 Kit: Duramax Hyamp 85° torch handle replacement
428154 Kit: Duramax Hyamp 15° torch handle replacement
428148 Kit: Duramax Hyamp hand torch handle screws
428156 Kit: Duramax Hyamp hand torch trigger with spring replacement
228719 Kit: Duramax and Duramax Hyamp hand torch cap-sensor switch replacement
428159 Kit: Duramax Hyamp hand torch lead replacement, 7.6 m (25 foot)
428160 Kit: Duramax Hyamp hand torch lead replacement, 15 m (50 foot)
To Next Page
Loading...
Need help?
General
