3.1.4 Expanded Function Mode of b Group
0: No Restart
1: Restart from 0Hz
2: Resume at frequency
corresponding motor speed
3: Resume at motor speed; then,
decelerated to stop
Line Loss Ride-Through Time
Line Loss Ride-Through Run
Delay
Electronic Thermal Overload Fault Setting
Motor Thermal Overload Level
Motor Thermal Overload Profile
0: Self Cooling
1: Forced Cooling
Overload/Overvoltage
Restriction Mode
0: OLR = OFF, OVR = OFF
1: OLR = ON, OVR = OFF
2: OLR = OFF, OVR = ON
3: OLR = ON, OVR = ON
Overload Restriction Level
HD : 180%
ND : 150%
(≤200HP)
HD : 150%
ND : 120%
(≥250HP
,300LF~
750LF)
Overload Restriction
Deceleration Rate
0: All Parameters are locked except
b09 when SFT terminal input
is ON
1: All parameters are locked
except b09 and F01
by SFT terminal signal
2: All parameters are locked
except b09
3: All parameters are locked
except b09 and F01
4: All parameters are locked
except b09, F01, F02, and F03