Installing Windows 95 Software
3
Click on the + mark for Display adapters.
4
Click on the Trident
**
Super VGA, and click on the Remove
button. Click on OK when prompted to remove the device.
5
Select No when prompted to restart Windows 95.
Windows 95 will restart.
6
Click on the + mark for Other devices.
7
Click on PCI VGA-Compatible Display Adapter and click on
the Properties button.
8
Click on the Driver tab, and click on the Change driver button.
9
In the Select Hardware Type dialog, select Display adapters
and click on OK.
10
Insert the Video Features Diskette for Windows 95 into the
diskette drive; then click on the Have Disk button and click on
OK.
11
Make sure the following is shown as the selection:
For TFT model:
IBM ThinkPad (Cyber9385/82) PCI
For DSTN model:
IBM ThinkPad (Cyber9320) PCI
Then click on OK.
12
Click on OK to install the driver into the computer.
13
When prompted to restart, click on Yes; then remove the
diskette from the drive and restart Windows 95.
202
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
Need help?
General
