Appendix B. Advanced Information for PC Cards
This appendix describes advanced information related to using PC Cards.
Auto Configurator for PC Card Director
To install the PCMCIA device driver:
Chapter 7.
Note:
When installing an operating system,
install the PCMCIA device driver that
is on the PC Card Director Diskette
to use the Auto Configurator.
The computers provide the
Auto Configurator
, a program for some PC
Cards, so that you do not have to install the device driver supplied with the
card to use it.
The resource and configuration information for the PC Cards are written in
the script files. Once the information is written, you can use the
Auto
Configurator Utility
to edit these script files.
When Auto Configurator is installed, the following line is added to the
CONFIG.SYS file according to your operating system:
For OS/2:
BASEDEV=AUTODRV2.SYS
For DOS and Windows:
DEVICE=[drive:] [directory] AUTODRV.SYS
Starting the Auto Configurator Utility for OS/2 or Windows
OS/2
WIN
This section describes the Auto Configurator Utility for OS/2 or Windows.
To start Auto Configurator Utility for OS/2 or Windows, select the Auto
Configurator Utility (
) icon from the PC Card Director window.
The operation for OS/2 and for Windows is the same.
Copyright IBM Corp. 1996 275
To Next Page
Loading...
Need help?
General
