Installing Windows 95 Software
Using Windows 95 with the Dock II
When you use the Dock II with your computer and Windows 95, you
need to disable the host adapter SCSI BIOS for Dock II. You can
disable the host adapter SCSI BIOS by using either the Dock II
SCSISelect
**
utility or the DIP switches in the Dock II:
Using the Dock II SCSISelect Utility
1
Attach your computer to the Dock II and turn on the computer.
2
Press and hold the Ctrl key; then press the A key when
prompted at boot time.
3
Select Configure/View Host Adapter Settings and disable the
Host Adapter BIOS.
Using the DIP Switches in the Dock II
To use the DIP switches, refer to the section “Using the SCSI
controller” in the
Dock II User's Guide.
Chapter 7. Installing Software 215
To Next Page
Loading...
Need help?
General
