IBM THINKPAD S05L-1270-01 Instruction Manual

Installing Windows NT Workstation Software
Installing the Mwave DSP Support Software for Windows NT
760
M
wave
To install the Mwave support software:
1 Start Windows NT and insert the Windows NT Mwave
installation disk #1 in the diskette drive.
2 Select File from the Program Manager window; then select
Run... from the pull-down menu.
3 Type A:\SETUP in the Open window.
4 Click on OK, and follow the instructions on the screen.
Note:
To use the Mwave DSP feature in
Windows NT, your computer must
have a minimum of 16 MB of
memory.
Note
Non-U.S. users must run the Country Selection program in the
Mwave window after the Mwave installation is complete. Restart
the computer after you run Country Selection.
Installing MIDI Sample Files
To use MIDI, install the MIDI sample files separately from the Mwave
installation:
1 Insert the MIDI installation disk in the diskette drive.
2 Select File from the Program Manager window; then select
Run... from the pull-down menu.
3 Type A:\SETUP in the Open window.
4 Select Yes when asked if you wish to use the samples.
5 When the installation is complete, restart the computer.
Configuring the Mwave Modem
After installing the Mwave driver, you need to configure the
communication port number to assign the Mwave modem resources
for Windows NT:
1 Start the ThinkPad Feature program, and double-click on the
Modem (
) icon.
222
IBM ThinkPad 760E, 760ED, or 760EL User's Guide

IBM THINKPAD S05L-1270-01 Specifications

General

Brand	IBM
Model	THINKPAD S05L-1270-01
Category	Laptop
Language	English