Installing Windows 3.11 Software
Installing Microsoft Windows Version 3.11
Windows 3.11 operates in a DOS environment. Install the following
before installing Windows:
DOS Version 7.0 (see your DOS manuals)
760
CD
CD-ROM Device Driver for DOS (see page 186)
ThinkPad Features program for DOS (see page 187)
Important
During installation, do the following for Windows to operate
correctly:
When the Windows Setup program asks you to select either
Express Setup or Custom Setup, select C for Custom
Setup.
Install Windows 3.11 with the default VGA display driver that
came with Windows. After you complete the installation of
Windows, install the ThinkPad display driver.
Do the following to install Windows Version 3.11 with Advanced
Power Management (APM):
1
Install Windows Version 3.11
with
the APM option:
a) Start the installation as specified in the Windows manual.
Note:
If you have installed OS/2, the path
to install Windows may have
changed to C:\OS2\MDOS\WINOS2
(C is the drive on which you installed
OS/2). If so, change the path to:
C:\WINDOWS
b) When the Windows Setup program asks you to select
Express Setup or Custom Setup, type C for Custom
Setup.
190
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
Need help?
General
