Six: Advanced Features 61
Providing a brighter solution.™
Including the PE953 Controller into a non-Multi-Wave (other
manufacturer’s) network.
The PE953 is a Z-Wave compliant device that may be included into networks created by other
manufacturer’s Z-Wave compliant controllers.
To include the PE953 into another manufacturer’s controller network:
Activate the 3rd party controller’s Controller Replication function to transmit network 1.
information to the PE953 according to that controller manufacturer’s instructions.
Press the down button on the PE953 to display the CNTRL OPTION screen. If the screen is 2.
not displaying LEARN MODE, press and hold the <P/S> and <ENTER> buttons at the same
time to put the device into programming mode.
Press the 3. <2> button on the PE953 to display the CNTRL COPY screen.
Press the 4. <2> button to receive network information on the PE953. The PE953 will display the
words WAITING FOR INCLUDE.
Upon completion, the PE953 will display SUCCESSFUL and will automatically reboot. The
PE953 will now function as a secondary remote controller in the 3rd party’s network.
To exclude the PE953 from another manufacturer’s 3rd party network, follow the instructions To
Reset the PE953 Hand-Held Controller found on page 42.
NOTE: Secondary remote controllers can be removed from any network without any
negative effects to the existing network by performing a controller reset on the secondary
remote controller.
To Next Page
Loading...
Need help?
General
