INVT SV-DA200-0R7-2 User Manual

SV-DA200 series AC servo drive Faults and solutions
-265-
Code
Name
Cause
Countermeasures
Er24-a
DC Sync0 signal
abnormal
DC Sync0 interruption signal is
not detected during a period of
time under DC sync working
mode.
Check whether interruption causes
data loss;
Check whether EtherCAT master
can work normally;
Er24-b
Disconnection fault
After the drive is enabled, the
network cable is detected to be
inserted improperly or EtherCAT
master is running improperly.
Check whether network cable is
connected properly, the connection
mode of network cable is top-in and
bottom-out;
Check interferences;
Check whether EtherCAT master
can work properly.
Er24-c
PDO data loss fault
No PDO data is received after
the drive is enabled for a period
of time.
Check whether EtherCAT master
works properly;
Check whether interference causes
data loss.

INVT SV-DA200-0R7-2 Specifications

General

Brand	INVT
Model	SV-DA200-0R7-2
Category	Controller
Language	English