To Next Page

To Previous Page

SV-DA200 series AC servo drive Running and operation

-86-

SHIFT

DOWN

UP UP

SET MODE

DOWN DOWN

SET MODE

DOWN

5.2.4 Parameter setting

MODE key can be used to switch into the parameters setting mode. SHIFT key can be used to select

the group number of the monitoring parameters, UP/DOWN can be used to select the internal

parameter number and pressing for a long time, it can be used to select the parameter number quickly.

After finding the target, SET key can be used to view the current value and SHIFT key to the

parameters setting. In the setting interface, UP/DOWN key can be used to set the value, SHIFT key

can be used to select the setting bit. After setting, press SET key to save the parameters. After

finishing, the screen will display (for storage parameters and P0.17 is set to 0) or

(for non-storage parameter or P0.17 is set to 1), and then return to the parameters mode

automatically.

Operation flowchart:

SHIFT

DOWN

SET MODE

SHIFT

DOWN

SET

Delay 1s

DOWN

MODE

5.2.5 Auxiliary function instruction

5.2.5.1 Auxiliary function menu

Press MODE to the auxiliary mode and press UP/DOWN to select auxiliary functions, the auxiliary

function table is shown below:

INVT SV-DA200-0R7-2 User Manual

Questions and Answers: