Jungheinrich EKS 314 User Manual

E 7
1005.USA
2 Starting up the truck
QwW Before the truck can be commissioned, operated or a load unit lifted, the
driver must ensure that there is nobody within the hazardous area (see
section “Safety regulations governing the operation of the industrial truck“ in
this chapter).
NOTICE Negotiating slopes and inclines: It is forbidden to operate this truck on
slopes and inclines.
NOTICE The truck must not be used to tow a trailer.
Checks and operations to be performed before starting daily work
– Check the whole of the outside of the truck for signs of damage and leaks.
– Check the battery attachment and wire connections for damage, make sure they
are secure.
– Check the battery connector - make sure it is secure.
– Check the overhead guard for damage.
– Check the load lifting device for visible damage such as cracks, bent or severely
worn load forks.
– Test pallet clamp operation.
– Check the load wheels for damage.
– Make sure the load chains are evenly tensioned.
– Make sure all safety mechanisms are correct and working.
– Test the operating and parking brake.
– For rail guidance systems check the guide rollers - make sure they are smooth and
not damaged.
– Check the belt for damage and wear.
QwW It is forbidden for more than one person to enter the driver’s cab at a time.
E 7
1005.USA
2 Starting up the truck
QwW Before the truck can be commissioned, operated or a load unit lifted, the
driver must ensure that there is nobody within the hazardous area (see
section “Safety regulations governing the operation of the industrial truck“ in
this chapter).
NOTICE Negotiating slopes and inclines: It is forbidden to operate this truck on
slopes and inclines.
NOTICE The truck must not be used to tow a trailer.
Checks and operations to be performed before starting daily work
– Check the whole of the outside of the truck for signs of damage and leaks.
– Check the battery attachment and wire connections for damage, make sure they
are secure.
– Check the battery connector - make sure it is secure.
– Check the overhead guard for damage.
– Check the load lifting device for visible damage such as cracks, bent or severely
worn load forks.
– Test pallet clamp operation.
– Check the load wheels for damage.
– Make sure the load chains are evenly tensioned.
– Make sure all safety mechanisms are correct and working.
– Test the operating and parking brake.
– For rail guidance systems check the guide rollers - make sure they are smooth and
not damaged.
– Check the belt for damage and wear.
QwW It is forbidden for more than one person to enter the driver’s cab at a time.

Jungheinrich EKS 314 Specifications

General

Brand	Jungheinrich
Model	EKS 314
Category	Forklifts
Language	English