To Next Page

To Previous Page

1005.USA

E 8

2.1 Attaching the safety restraint belt

QwD Check the safety restraint belt (27) and the eye (25), safety rope (24),

karabiner hooks (23, 26) and attachment point (22) on the overhead guard

daily for wear and damage. If the belt system (23 – 27) is damaged, do not

use the truck under any circumstances. The belt must be immediately

replaced after an accident (catching a person) or if it is damaged or worn.

Any damage must be reported to a supervisor.

All warnings on the belt must be read and observed.

QwD Attach and fasten the safety restraint belt as soon as you get on the platform

and before starting other work.

– Attach the safety restraint belt (27) to your body.

– Attach the safety rope (24) and karabiner hook (23) to the overhead guard.

– Attach the safety rope (24) and karabiner hook (26) to the eye (25) of the safety

restraint belt (27).