To Next Page

To Previous Page

F 3

0805.USA

3 Charge the battery

QwW Park the truck securely

(see section “Parking the Truck Securely” in Chapter E).

– Turn key switch (2) to "0" (zero).

– Lift up the battery panel (4).

QwW Only connect and disconnect the battery connector and the socket when the

mains and charger are switched off.

– Remove the battery connector (5).

– If necessary, remove the insulating mat from the battery.

QwW When charging, the tops of the battery cells must be exposed to provide

sufficient ventilation. Do not place any metal objects on the battery. Before

charging, check all cables and plug connections for visible signs of damage.

– Connect the charger lead of the battery charger station with the battery connector.

– Switch on the charger.

– Charge the battery in accordance with the battery and charging station manufactur-

ers’ instructions.

QwW It is essential to follow the safety regulations of the battery and charger station

manufacturers.

1 2

F 3