Juniper SRX650 User Manual

Table 46: 2-Port 10- Gigabit Ethernet XPIM SFP+ Transceivers (continued)
ConnectorInterface TypeProduct Number
LC10GBase-LR Ethernet optical
transceiver SFP, 10 Km reach
SFPP-10GE-LR
LC10GBase-ER Ethernet optical
transceiver SFP, 40 Km reach
SFPP-10GE-ER
LC10GBase-LRM Ethernet optical
transceiver SFP, 220 m reach
SFPP-10GE-LRM
Cable connector with 1 m
cable length
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
Copper Twin-AX 1m
Cable connector with 3
m cable length
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
Copper Twin-AX 3m
Cable connector with 5
m cable length
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
Copper Twin-AX 5m
Cable connector with 7
m cable length
10GE Ethernet cable assembly plugs
into SFP+ socket, 15 m reach
Copper Twin-AX 7m
Related
Documentation
2-Port 10-Gigabit Ethernet XPIM Overview on page 83•
• 2-Port 10-Gigabit Ethernet XPIM Key Features on page 86
• 2-Port 10-Gigabit Ethernet XPIM Hardware Specifications on page 88
• 2-Port 10-Gigabit Ethernet XPIM LEDs on page 89
• 2-Port 10-Gigabit Ethernet XPIM Basic Configuration on page 223
2-Port 10-Gigabit Ethernet XPIM Key Features
The 2-Port 10-Gigabit Ethernet XPIM supports the following key features:
•
Contains a total of four ports:
•
Two SFP+ fiber ports
•
Two 10 G Base-T copper ports
Only two of the four ports can be active at the same time (one from port group 0 and
one from port group 1). Mixing and matching between the copper and fiber port types
is supported.
•
Receives SFP+ optics and, at a minimum, supports these SFP+ transceivers:
•
SFPP-10GE-SR
•
SFPP-10GE-LR
•
SFPP-10GE-ER
Copyright © 2015, Juniper Networks, Inc.86
SRX Series Services Gateways for the Branch Physical Interface Modules Reference

Juniper SRX650 Specifications

General

Brand	Juniper
Model	SRX650
Category	Gateway
Language	English