Related
Documentation
1-Port SFP Mini-Physical Interface Module Overview on page 39•
• 1-Port SFP Mini-Physical Interface Module Hardware Specifications on page 41
• 1-Port SFP Mini-Physical Interface Module Network Interface Specifications on page 20
• 1-Port SFP Mini-Physical Interface Module LEDs on page 41
• 1-Port SFP Mini-Physical Interface Module Basic Configuration on page 208
1-Port SFP Mini-Physical Interface Module Hardware Specifications
Table 26 on page 41 gives the physical specifications of the 1-Port small form-factor
pluggable Mini-Physical Interface Module (SFP Mini-PIM).
Table 26: 1-Port SFP Mini-PIM Physical Specifications
ValueDescription
0.80 in. x 3.75 in. x 5.9 in.
(2.0 cm x 9.5 cm x 14.5 cm )
Dimensions (H x W x L)
3.36 oz (95 g)Weight
SFPConnector type
Mini-PIMForm factor
Related
Documentation
1-Port SFP Mini-Physical Interface Module Network Interface Specifications on page 20•
• 1-Port SFP Mini-Physical Interface Module Supported Modules on page 42
• 1-Port SFP Mini-Physical Interface Module Key Features on page 40
• 1-Port SFP Mini-Physical Interface Module LEDs on page 41
• 1-Port SFP Mini-Physical Interface Module Basic Configuration on page 208
1-Port SFP Mini-Physical Interface Module LEDs
The 1-Port small form-factor pluggable Mini-Physical Interface Module (SFP Mini-PIM)
has two LEDs located to the right of the socket. Table 27 on page 41 describes the LED
states.
Table 27: 1-Port SFP Mini-PIM LED States
DescriptionStateColorLED
Port is onlineOnGreenLINK
Port is offlineOff
41Copyright © 2015, Juniper Networks, Inc.
Chapter 4: 1-Port SFP Mini-Physical Interface Module