CHAPTER 5
1-Port ADSL2+ Mini-Physical Interface
Module
•
1-Port ADSL2+ Mini-Physical Interface Module Overview on page 45
•
1-Port ADSL2+ Mini-Physical Interface Module Key Features on page 46
•
1-Port ADSL2+ Mini-Physical Interface Module Hardware Specifications on page 47
•
1-Port ADSL2+ Mini-Physical Interface Module LEDs on page 47
•
1-Port ADSL2+ Mini-Physical Interface Module Supported Standards on page 48
•
1-Port ADSL2+ Mini-Physical Interface Module Supported Loopback
Diagnostics on page 49
1-Port ADSL2+ Mini-Physical Interface Module Overview
The 1-Port ADSL2+ Mini-Physical Interface Module (Mini-PIM) provides a single physical
interface to asymmetric digital subscriber line (ADSL) network media types.
The following 1-Port ADSL2+ Mini-PIM cards are available:
•
Annex A
•
Annex B
NOTE: The ADSL2+ Annex A card also operates in Annex M mode.
Figure 8 on page 45 shows the front panel of ADSL2+ Annex A Mini-PIM.
Figure 8: ADSL2+ Annex A Mini-PIM Front Panel
Figure 9 on page 46 shows the front panel of ADSL2+ Annex B Mini-PIM.
45Copyright © 2015, Juniper Networks, Inc.