CHAPTER 18
Quad CT1/E1 GPIM
•
Quad CT1/E1 GPIM Overview on page 121
•
Quad CT1/E1 GPIM Components on page 122
•
Quad CT1/E1 GPIM Key Features on page 123
•
Quad CT1/E1 GPIM Hardware Specifications on page 123
•
Quad CT1/E1 GPIM LEDs on page 124
Quad CT1/E1 GPIM Overview
A Gigabit-Backplane Physical Interface Module (GPIM) is a network interface card (NIC)
that installs in the front slots of the SRX550 or SRX650 Services Gateway to provide
physical connections to a LAN or a WAN. The GPIM receives incoming packets from a
network and transmits outgoing packets to a network.
NOTE: The Quad CT1/E1 GPIM does not support channelization.
The Quad CT1/E1 GPIM provides the physical connection to T1 or E1 network media types
and also performs T1 or E1 framing and line-speed signaling.
NOTE: Only the SRX650 Services Gateway supports hot-swappable
functionality for GPIMs. The SRX550 Services Gateway does not support
hot-swappable functionality for GPIMs.
Figure 32 on page 121 shows the Quad CT1/E1 GPIM.
Figure 32: Quad CT1/E1 GPIM
Related
Documentation
Quad CT1/E1 GPIM Key Features on page 123•
121Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
