70
Menu Display and Detailed Settings
* Default values are indicated in bold characters.
Shooting Assist Item
* Default values are indicated in bold characters.
LCD/VF Menu
Item Setting Values Function
Shooting Assist...
Menu for setting the Shooting Assist function. (A Page 70)
Marker Setting...
For setting items such as the safety zone and center mark. (A Page 71)
Status Display...
For setting displays related to the status screen. (A Page 71)
LCD Bright
10 to 6,
5,
4 to 0
For setting the brightness of the LCD monitor screen.
VF Bright
10 to 6,
5,
4 to 0
For setting the brightness of the viewfinder screen.
LCD Backlight
Auto
Standard
Brighter
For setting the brightness of the LCD monitor backlight.
Auto : Sets the brightness automatically.
Standard : Sets to the standard brightness.
Brighter : Sets to a brightness brighter than Standard.
VF Slide SW
Disable
Enable
For setting whether to link the showing/hiding of the viewfinder screen with the pulling out of
the viewfinder. (A Page 22)
Disable : Shows the screen regardless of the viewfinder status.
Enable : Shows the screen only when the viewfinder is pulled out.
Memo :
● When there is no display on the LCD monitor, the viewfinder screen is displayed regardless
of the setting.
● When the [HDMI], [COMPONENT OUT] or [A/V OUT] terminal is connected, video images
will not appear on the viewfinder.
Item Setting Values Function
Focus Assist
On
Off
For selecting whether to add color to the contour of the focused image upon switching the
image to black-and-white. (Focus Assist function) (A Page 29)
On : Enables the Focus Assist function.
Off : Disables the Focus Assist function.
Color Blue
Green
Red
For setting the display color of the focused area when Focus Assist is activated.
Blue : Displays the focused area in blue.
Green : Displays the focused area in green.
Red : Displays the focused area in red.
Zebra
On
Off
For setting whether to display zebra patterns at the bright areas of the subject. (A Page 32)
On : Displays the zebra pattern.
Off : Hides the zebra pattern.
Top
Over,
100% to 85%,
80%,
75% to 5%
(In 5 % increments)
For setting the maximum luminance level for the zebra pattern display.
Memo :
● The relation between Top and Bottom is such that Top>Bottom always holds. To maintain
this relation when setting Bottom, the Top value is automatically corrected.
Bottom
100% to 75%,
70%,
65% to 0%
(In 5 % increments)
For setting the minimum luminance level for the zebra pattern display.
Memo :
● The relation between Top and Bottom is such that Top>Bottom always holds. To maintain
this relation when setting Bottom, the Top value is automatically corrected.
GY-HM150U.book Page 70 Monday, September 5, 2011 1:48 AM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
