KEB COMBIVERT F4-C Applications Manual

7
ANTRIEBSTECHNIK
6
37
KEB COMBIVERT F4-C
Name: Basis
28.01.98
6
Section
Page
Date
© KEB Antriebstechnik, 1997
All Rights reserved
Chapter
Functional DescriptionDigital In- and Outputs
t
t
t
t
t
4ms
t
t
t
t
10 11 14
FR U ext
X1
10 11 14
FR U ext
X1
Edge-active strobe or static
strobe?
di.19 Strobe mode
Picture 6.3.8.a Edge active strobe
Picture 6.3.8.b Static strobe
Strobe input
resultant
Strobe signal
Terminal
Input status
Clock
Strobe input
resultant
Strobe signal
Terminal
Input status
6.3.9 Mode of Rotation
setting (di.20
Bit0)
The terminals Forward (F) and Reverse (R) are non-programmable, but their function
can be influenced with this parameter.
di.20 = 1 (standard) di.20 = 0
Forward Reverse Start/
Stop
Forward/
Reverse
Parameter Setting Range Function
di.19 0 edge active strobe (see picture 6.3.8.a)
1 static strobe (see picture 6.3.8.b)
It is standard, that the strobe is edge active, i.e. the input states with the rising edge
are accepted and held to the next edge. In some case it is useful to use the strobe as
a Gate-Function. For this case the strobe signal is a static, i.e. the input signals are
accepted as long as the strobe is set. (or the Gate is open).
For additional functions of di.20
see at (Chap. 6.4 Page 7) and
(Chap. 6.9.6)
(Forward has priority)

KEB COMBIVERT F4-C Specifications

General

Brand	KEB
Model	COMBIVERT F4-C
Category	DC Drives
Language	English