KEB COMBIVERT F4-C Applications Manual

13
ANTRIEBSTECHNIK
6
113
09.04.99
KEB COMBIVERT F4-C
Name: Basis
6
© KEB Antriebstechnik, 1999
All Rights reserved
Functional Description
Chapter
Section
Page
Date
Operating and Appliance Displays
Adr.
min max
default
Adr.
min max
default
Adr.
min max
default
Adr.
min max
default
Adr.
min max
default
2018h
ru.24 Display OL - counter
1
%
-
1000
To prevent „E.OL“ errors caused by too high loads (load reduction), the internal counter content of the OL-counter can
be made visible. At 100 % the inverter switches off with the error „E.OL“. The error can be reset only after a cooling time
(blinking display „E.nOL“).
201Dh
ru.29 Heat sink temperature
1
°C
-
1000
ru.29 displays the current heat sink temperature of the inverter. Below 20°C noF (no Function) is displayed.
201Eh
ru.30 Display PI-controller output
0,1
%
-
100-100
A universal PI-controller is integrated into the inverter. It can be used externally as well as internally. So that the
controller is independent as much as possible, the indicated manipulated variable is given out in percentage in relation
to a +/- 10V signal.
201Fh
ru.31 Operating hours-meter 1
1
h
-
655350
The operating hours-meter 1 displays the time the inverter has been switched on. The indicated value includes all
operating phases. On attaining the maximum value (approx. 7.5 years) the display remains on the maximum value.
2020h
ru.32 Operating hours-meter 2
1
h
-
655350
The operating hours-meter 2 displays the time the inverter has been active (motor controlled). On attaining the maximum
value (approx. 7.5 years) the display remains on the maximum value.

KEB COMBIVERT F4-C Specifications

General

Brand	KEB
Model	COMBIVERT F4-C
Category	DC Drives
Language	English