Keithley 2182 User Manual

14-6 SCPI Reference Tables
Table 14-5
OUTPut command summary
Command Description
Default
Parameter
Ref
SCPI
:OUTPut Sec 10
:GAIN <NRf> Set analog output gain (M); -100e6 to 100e6 1
:GAIN? Query analog output gain.
:OFFSet <NRf> Set analog output offset (B); -1.2 to 1.2. 0
:OFFSet? Query analog output offset.
[:STATe] <b> Enable or disable analog output (OFF forces 0V). ON
[:STATe]? Query state of analog output.
:RELative <b> ON uses the present analog output voltage as the Rel value.
OFF disables analog output Rel.
OFF
:RELative? Query state of Rel.
Table 14-6
ROUTe command summary
Command Description
Default
Parameter
Ref
SCPI
:ROUTe Sec 9
:SCAN Path to configure and control scanning: √
:INTernal Internal scanning:
:CCOunt <n> Specify number of readings on Channel 1; 1 to 1023.
:CCOunt? Query Channel 1 count.
[:EXTernal] <list> Specify external scan list. (@1:10)
:LSELect <name> Select and enable scan operation; INTernal, EXTernal
or NONE.
:LSELect? Query selected scan operation.

Keithley 2182 Specifications

General

Brand	Keithley
Model	2182
Category	Measuring Instruments
Language	English